BMW E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!

1 - 6 of 6 Posts

·
...and I'd be all shiny..
Joined
·
1,831 Posts
Discussion Starter #1
What possibility is there to run Visions with a BBK (Brembo, Technik, UUC etc...) and not have to use spacers? I've been leaning more toward the Visions but I definitly plan on getting a BBK at some point and dont want my wheel choice to prevent that.
 

·
Registered
Joined
·
1,803 Posts
Well I can get my whole big hand between the inside of the wheel and the rotor. :D I always have a clean inside of the rim.:D
 

·
Registered
Joined
·
1,320 Posts
UUC and AC Schnitzer's should fit..
Brembo 12.6 might fit...stoptech, brembo 14" won't fit I believe...
Most if not all breyton wheels have problems clearing a BBK...
 

·
Registered
Joined
·
4,111 Posts
Yea, the biggest problem trying to fit 13"/14" BBK is if the rims haved straight/curved in spokes. 14" will be almost impossible, but if it could fit, you'd get like a 1.0/1.5" lip downgrade sacrifice.
If your rim spokes curve outward, then your almost good to go..Thats why Hamann PG2/PG3 always have no problem! :)
 
1 - 6 of 6 Posts
Top