BMW E46 Fanatics Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
536 Posts
How I did mine is to open the brake fluid reservoir at the engine bay and then used a C-clamp to push the caliper pistons in. The fluid may overflow in the engine bay but just wash it down with water after closing the reservoir...:)
 

·
PSHOPWERKS
Joined
·
4,579 Posts
Don't forget to bed the new pads in. I went driving during the midnight hours to do mine. :D
 
1 - 15 of 15 Posts
Top