BMW E46 Fanatics Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
154 Posts
Discussion Starter #1
I have a o2' 325Ci with a H&R cupkit and im looking at getting either 19x8.5 or 19x9.5, and I was curious if I would need to rooll my fenders or do anything like that
 

·
Registered
Joined
·
154 Posts
Discussion Starter #2
anyone have any suggestions or input
 

·
Registered
Joined
·
154 Posts
Discussion Starter #3
anyone
 

·
Registered
Joined
·
90 Posts
From what I've read on this forum and I could be wrong, you should be fine with that tire setup since your ride is a coupe (got more clearance in rears). I was thinking about the same thing on mine but the 19x9.5 is too much for my sedan if I wanted to drop too. I would make sure on the tire size (width) and how much that cup kit will drop your car.
 

·
Registered
Joined
·
350 Posts
I've seen the super mesh in person. Very nice wheels IMHO.

19x8.5 with 235/35/19 size tires will not be a problem. 19x9.5 is in the rear on 255/30/19 I'm pretty sure will be okay. I don't think you could run 265's in the rear without fender rolling.

Someone please confirm?
 

·
Registered
Joined
·
154 Posts
Discussion Starter #6
can anyone confirm this
 

·
Registered
Joined
·
154 Posts
Discussion Starter #7
does anyone care to help me these hard time
 

·
Registered
Joined
·
154 Posts
Discussion Starter #8
say mr gary from tire rack do you have anything to say that might help
 

·
2 point five 3 two 3 i
Joined
·
3,922 Posts
my best suggestion would be to run a search on the axis supermesh and see who has them and then pm them. they would probably be able to help you. I know for sure that TZ Blue D3 has them on his coupe. you might want to drop him a pm. good luck bro.
:thumbup:
 
1 - 9 of 9 Posts
Top