BMW E46 Fanatics Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
66 Posts
Discussion Starter #1
New to the site.........

Currently rolling on 18's (stock M3 wheels), looking to upgrade to 19's. Looking at the Axis Milano (new wheel). Will probably go staggered....8.5 (front) and 9.5 (rear). They have a huge lip (polished) and are relatively inexpensive.

Any thoughts and or pic's out there????
 

·
Registered
Joined
·
66 Posts
Discussion Starter #4
Thanks TL,

Been in contact with Derek at Spyeng.com. He sent pic's and
prices. Very, very reasonable. I'm certainly leaning this way!!
 

·
Registered
Joined
·
66 Posts
Discussion Starter #6
axis milano

TZ,

Yeah, that supermesh is tight!! Nice ride. Think I'm going 8.5f and 9.5r , 19's of course. Will probably have to roll the fenders.......car is dropped (Eibach). What's your wheel set-up?
 

·
Registered
Joined
·
66 Posts
Discussion Starter #8
axis milano's

Actually the Hamann HM II's are still an option as are the
I-Forged Aero's. Kinda leaning toward the Milano's because
of the huge lip, it's polished, and it has the 5-spoke and rivet
design. Not to mention cost!!!!!
 

·
Registered
Joined
·
90 Posts
The other place I found good prices is wheelsboutique.com I was quoted 2000 delivered with tires. You might want to give them a call, they're in Fl.
 

·
Registered
Joined
·
937 Posts
Re: axis milano

jwill said:
TZ,

Yeah, that supermesh is tight!! Nice ride. Think I'm going 8.5f and 9.5r , 19's of course. Will probably have to roll the fenders.......car is dropped (Eibach). What's your wheel set-up?
19X8.5 19X9.5 rears rolled Koni Adjustables w/ Eibach prokit
 

·
Registered
Joined
·
271 Posts
jwill said:
New to the site.........

Any thoughts and or pic's out there????
Welcome...... The Milano's look very much like the Hamann HM2's but a lot less. It's the plain look and hugh lip that make it look awesome. Would be my choice. :thumbup:
 

·
Registered
Joined
·
99 Posts
If I were you I would go with the Supermesh's. I've obtained pricing from quite a few dealers on 19" x 8.5" & 9.5"setup. If you like I can send you a PM with the pricing information I received, let me know.
 

·
Registered
Joined
·
66 Posts
Discussion Starter #15
Thanks for the offer "ZoomingM3". Go ahead and forward me
the pricing info....... 'preciate it, brother!!!
 
1 - 15 of 15 Posts
Top