E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of October's Ride of the Month Challenge!
1 - 5 of 5 Posts

·
Registered
Joined
·
335 Posts
Discussion Starter · #1 ·
Just looking for any kind of info about the new AVR kit in Autovogue.com and builiding some interest in it.

Is is really made by Hamann or just Hamann-like?

Any better pics of it?

Is the front as low as Reiger or more like OEM?
if it's like OEM , it should flow with my 325Ci stock sideskirts right?
also don't have to worry about bumping it.

if it's not as low as Reiger, wonder if Hamann lip spoiler
will look weird on it (since it's made for M3 w/ wider fenders)

wondering if the foglight portion is part of the kit (i.e. one piece
or did they just put in hamann's foglight cover)?

Also, is it poly , fiber glass, or ABS.

Anyways , hopes it gets to the US soon , may be we
can do group buys. I'm in Bay area , CA.
 

·
Europrojektz NW
Joined
·
774 Posts
The OEM M3 front can be fitted with little modifications so no need to get the AVR one. I am more so curious as to the whole rear bumper fitments...hopefully they release so information on that soon...
 

·
Registered
Joined
·
335 Posts
Discussion Starter · #4 ·
E46_Angemon,

From what I read,
there were a lot of problems fitting an OEM M3 front on a 3er.
People say you need a good shop that does custom fit which means $$$$.

could you shed some light on this issue.
or is there a writeup / thread about the pains of custom fitting
the M3 front.

thanks,
 

·
You ain't fresh AZIMIZ!!!!!
Joined
·
1,784 Posts
That's wierd I was just reading my latest issue of Performance BMW and saw the autovogue ad. I thought the sides and rear looked great but you have to run duel exhaust.
 
1 - 5 of 5 Posts
Top