E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of September's Ride of the Month Challenge!
1 - 1 of 1 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hello, i have recently installed my angel eyes dtm style to my e46 2003 saloon and i am facing a problem. Every bulb seems to work fine but when i turn the car on for 20-25 seconds the dash front light warning comes up for both sides and when i have the lights to low beams the side lights are on, when i switch to the normal beams the side lights turn off. I have the angel eyes wired as such: white wire -> interior light, relay -> positive and ground ports in engine bay, red wire -> t joint to a low beam socket. Both sets of angel eyes have ballast and fuses.

Can some one please advice?
 
1 - 1 of 1 Posts
Top