E46 Fanatics Forum banner
1 - 3 of 3 Posts

·
Registered
2002 E46 320i (M54B22) Touring
Joined
·
85 Posts
Discussion Starter · #1 · (Edited)
Hey, I just attached my aftermarket boss, tightened it to spec and realized that it wasn't aligned and that I want to remove the stock cable. When I try pulling it off it isn't budging at all, it's really stuck on there. I've read that some people used the steering wheel as leverage but I'm too afraid to bend it or something so I'd rather not. How should I go about doing this?

Wheel Automotive tire Automotive design Tire Vehicle brake

White Automotive tire Bicycle part Rim Camera accessory


Sorry if this is in the wrong forum.

thanks
 

·
Registered
2005 330ci
Joined
·
304 Posts
Insert the bolt halfway, with the steering wheel attached, and pull on it while you wiggle. The bolt will keep the steering wheel from hitting you in the face. If that doesn’t work, you can use a gear puller.
 

·
Registered
2002 E46 320i (M54B22) Touring
Joined
·
85 Posts
Discussion Starter · #3 ·
Insert the bolt halfway, with the steering wheel attached, and pull on it while you wiggle. The bolt will keep the steering wheel from hitting you in the face. If that doesn’t work, you can use a gear puller.
Yep, ended up doing that, thanks for the help.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top