BMW E46 Fanatics Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter #1 (Edited)
Just wanted to post the results of the dyno session I had over at MaximumPSI in NJ - cool guys btw.

My car: 2002 M3 Vert, SMG.
My mods: AFE Stage 2 and Shark Injector.
(Mods have been on for about 2,000 miles)

Stock air box, Shark : 282 rwhp / 226 rwtq
AFE Stage 2, Shark : 289 rwhp / 232 rwtq

P.S. This dyno method worked for me:
While on the dyno, put it in 1st gear and rev up to 6k,
let RPM's fall to 0,
Turn the car off to Position 1
Turn to Position 2 and hold DSC for 20 sec
Continue to turn the key and start the car
Press DSC once.
Your dash should be lit up with just about every light possible.

dyno run.jpg

dyno run.jpg
 

·
Registered
Joined
·
25 Posts
Discussion Starter #5
did u dyno before the shark?

thanks for the info
Nope, never got to dyno before the shark but I will very soon. I am restoring the Shark and taking off the intake for a week or 2. I'll be getting the recall done and inspection 2. I'll try to get out to the shop again and get some bone stock numbers. I am expecting around 275-279 rwhp completely stock.
 
1 - 6 of 6 Posts
Top