E46 Fanatics Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
95 Posts
...
Connector position 1. Brown/Black = Ground
2. Gray = Cruise Control Interrupt
3. Vio/Yellow = 12 Volts
4. Blue = Clutch/Start Interrupt
or Blue/Brown

To bypass the Clutch/Start function, cut the Blue (or Blue Brown) wire
to the switch and splice it into the 12 Volt Vio/Yellow wire.

This way, Cruise Control will still function normally and a Clutch stop can be used at any height.
I have 1/2004 production model and I have the following wires:
  1. Brown with black
  2. Blue with grey or brown hard to tell
  3. Violet with yellow
  4. Blue with black

I am guessing splice the Blue with Black to the Violet with yellow.

Can anyone confirm?

Thanks,
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top