E46 Fanatics Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
11 Posts
When I replaced the DSC module on my E39 I had to code the module to my car using NCS Expert and calibrate the steering angle using DIS. I believe there are many posts on this. I believe this is the same for an E46.

On my E46 I recently coded the LCM to my VIN using BMW Scanner 1.4. I expect that can also be used for the dsc module.

NCS Expert and BMW Scanner 1.4 use different cables, but neither are expensive.
 
1 - 1 of 1 Posts
Top