E46 Fanatics Forum banner
1 - 5 of 5 Posts

·
Registered
Joined
·
587 Posts
Discussion Starter · #1 ·
OK so have a 2000 323i, non sport, and have my car on tein s tech springs with koni srt.t struts up front, and in rear tein are on stock shocks, but still after a fender roll and pull I still rub on top part of fender and have gotten a bubble in the clean coat and crack in paint on both fenders, I am running 225x35x19 front and back, but was wondering if any body has used coil spring spacers, and if they work I was thinking of going with a inch spacer to be safe with still a dropped look, I am raked and front tucks a little but kind of makes my car look goofy, I would like it to be close to rear with a slight rake.

Sent from my SAMSUNG-SGH-I997 using Bimmer App
 

Attachments

1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top