BMW E46 Fanatics Forum banner

1 - 4 of 4 Posts

·
Banned
Joined
·
209 Posts
Discussion Starter #1
I can't seem to get my driver's side headlight to stop getting condensation. I've taken it off a few times but it seems to get worse.

Dealer won't touch it because I painted the OEM headlight trim-ugg

M stripes
 

·
-not a mod-
Joined
·
31,620 Posts
Just check all seals...clean it good, and look around and make sure everything is snug...
 

·
Obey my dog
Joined
·
2,643 Posts
there is a little peg that you probably pinned under the front clear plastic. it's really hard to see but it creates enough of a gap to do that. i had that problem after i took mine apart the first time and it took me awhile to figure it out.
 

·
Like school on a Sunday...
Joined
·
837 Posts
I had this problem with one headlight, then with one of my foglights. I took the car to the dealer that installed the foglights, but they couldn't find a problem. Eventually it just stopped happening.:dunno:
 
1 - 4 of 4 Posts
Top