A/C ERROR - IHKA PROBLEMS

Looks like Transport Mode got turned on.

This video shows turning it off in the Radio module using INPA.

This video shows turning it off in the IHKA module using DIS.

Bali said:

Looks like Transport Mode got turned on.

Click to expand...

Yes, how you do to disable?

Bali said:

Looks like Transport Mode got turned on.
This video shows turning it off in the Radio module using INPA.

Click to expand...

It is not the same mode of transport.
In this video you shared it's about the mode of transport for the radio.
I have the error code "255 energy transport mode" in module air conditioner.

TheBMWguy98 said:

It is not the same mode of transport.
In this video you shared it's about the mode of transport for the radio.
I have the error code "255 energy transport mode" in module air conditioner.

Click to expand...

See my edited post above for IHKA. Although he uses DIS, I expect INPA supports it.

@Bali DIS and INPA are not the same thing..
I only have INPA and NCS Expert

TheBMWguy98 said:

DIS and INPA are not the same thing.

Click to expand...

Yes, I know that.

Doesn't anyone know a solution?

Good evening everyone, after various checks with Inpa, NCSexpert and Toll32,
I have confirmation that it has not gone into transport mode but there is an error present.

I have a short circuit to ground of the a/c system and I'm trying to solve it but I also encountered a potential problem with the IHKA module because if I activate only the fan the speed never reaches the maximum but halfway, the A/C button doesn't work finally it rear window defroster (see video).
I have a strong suspicion that it's the completely broken the resistor, is that possible?
Video IHKA