BMW E46 Fanatics Forum banner

1 - 1 of 1 Posts

20 Posts
Discussion Starter #1 (Edited)
Hi guys, car (2003 e46 320d) rapidly lost power now runs really lumpy. Almost as if at least 2 cylinders had gone. Car is running very rich and I have no fault codes so started looking at the injectors. From inpa I got the following from selective mass adjustment.

Cylinder 1 4.30
Cylinder 2 -3.14
Cylinder 3 -3.03
Cylinder 4 1.9
All mg/hub

Being the first time I have used this level of diagnostics, would I be correct in reading this as issues with injectors 1 and 4 and 2 and 3 are trying to compensate or am I way off the mark here? Obviously I'd rather work out what the issue is before I throw even more money at the car.

1 - 1 of 1 Posts