BMW E46 Fanatics Forum banner

1 - 3 of 3 Posts

·
Premium Member
2004 325Ci 5MT M54B25 Stock / 2005 330Ci 6MT M54B30
Joined
·
174 Posts
Discussion Starter #1 (Edited)
I have a full clutch kit from the old BAVAUTO parts site. It includes all parts to refresh your clutch.

2004 325 Ci, 5 speed - I was going to replace the clutch myself but after research decided to have it replaced and they would not use my parts. My new e46 is a 2005 330 6speed so I can not use the kit.

Bavarian Autosport Clutch KitCK E46 3
Products
2 x Down Pipe Gasket - 2 Required Per Car - CRP00963400
0​
6 x Pressure Plate Mounting Bolt - sold individually - 6 required - Genuine BMW07 11 9 906 045
0​
8 x Flywheel Bolt - Sold Individually - Genuine BMW11 22 2 243 051
0​
4 x Nut $5.0018 30 1 737 774
0​
1 x Clutch Kit - Basic - Genuine BMW21 20 7 551 576
1​
1 x Throw-Out Bearing Release Arm Pivot Pin21 51 1 223 328
0​
1 x Standard Transmission Shift Linkage Seal - Elring327.298
0​
1 x Rear Main Seal Housing Gasket - Elring635.381
0​
1 x Rear Engine Seal - Elring702.994
0​
1 x Clutch Alignment Tool - Bavarian AutosportCT 1014
0​
1 x Standard Transmission Output Seal - Genuine BMW23 12 8 677 737
0​
1 x Pilot Bearing - ***6002.2RSR
0​
1 x Shaft seal - Corteco01025674B
0​
Model
BMW 2004 325ci

IMG_5638 (2).JPG IMG_5639.JPG IMG_5640.JPG IMG_5641.JPG IMG_5642.JPG IMG_5643.JPG IMG_5644.JPG IMG_5645.JPG
 

·
Registered
Joined
·
196 Posts
Gday,

I’ve been looking at doing this exact install on my 02 325i , clutch kit, DMF, rear main seal etc.

I’ve just made a big order to FCP for various parts but held off on the clutch.

Would you consider shipping to Adelaide, South Australia please ?

Shipping via fedex with fcp wasn’t too bad price wise

Thanks

Dean
 

·
Premium Member
2004 325Ci 5MT M54B25 Stock / 2005 330Ci 6MT M54B30
Joined
·
174 Posts
Discussion Starter #3
Gday,

I’ve been looking at doing this exact install on my 02 325i , clutch kit, DMF, rear main seal etc.

I’ve just made a big order to FCP for various parts but held off on the clutch.

Would you consider shipping to Adelaide, South Australia please ?

Shipping via fedex with fcp wasn’t too bad price wise

Thanks

Dean
I would consider it. Send me a PM with your address so I can calculate the shipping cost before you commit.

Not sure what else I need to consider with customs/etc.

s/Mike
 
1 - 3 of 3 Posts
Top