BMW E46 Fanatics Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
482 Posts
Discussion Starter #1
OK I had these up the other day, basically all the wheels had some normal curb rash and one had a place on it that got chewed up real bad, Well, I didnt have pics so I just put them up on ebay and after winning them the dude asked if they would fit an audi, um no, SOOOOO... I then decided I would bust ass & refinish the curb rash & get some pics taken, the pics here are of the rim that was chewed up AFTER I did the DIY curb rash fix I found on the audi board, It worked AWESOME, If you look real close you can tell its been fixed but on the car you wont be able to see it at all, This is the WORST rim of the bunch, all the others look pristine, these are 18" X 8 35 mm offset. The diy was alot of work but I think it turned out really well, sorry the pics arent better I had to use a crappy quickcam to get the pics. these are "flick " rims Lex model & weigh 21#s these are good rims, first $550 gets them shipped. thanks

this is the worst part. it was pretty bad, this is a vast improvement believe it or not. this is as bad as it gets on any of the rims, and this is the only spot really

<img src="http://photos.e46fanatics.com/data/500/3280rimfix3.jpg">

these are pics of the refinished lip, both these places had rash on them, as you can see they look pretty good, this is how ALL of the rims look except for the one spot shown above
<img src="http://photos.e46fanatics.com/data/500/3280rimfix4.jpg">
<img src="http://photos.e46fanatics.com/data/500/32801.jpg">
<img src="http://photos.e46fanatics.com/data/500/3280attachment.jpg">
 

·
Registered
Joined
·
482 Posts
Discussion Starter #2
more pics
<img src="http://photos.e46fanatics.com/data/500/3280rimfix2.jpg">
<img src="http://photos.e46fanatics.com/data/500/3280attachment1.jpg">
 

·
Registered
Joined
·
482 Posts
Discussion Starter #8
ok i just used a tape measure looked like at the narrowest point, right near the hub, it had 2.5"s of clearance , Not sure how many mm's that is, the offset is 35mm, is that the same thing?
 

·
Registered
Joined
·
3 Posts
maybe its to late to ask? did you sold it yet...

:cry:
XscoreX said:
OK I had these up the other day, basically all the wheels had some normal curb rash and one had a place on it that got chewed up real bad, Well, I didnt have pics so I just put them up on ebay and after winning them the dude asked if they would fit an audi, um no, SOOOOO... I then decided I would bust ass & refinish the curb rash & get some pics taken, the pics here are of the rim that was chewed up AFTER I did the DIY curb rash fix I found on the audi board, It worked AWESOME, If you look real close you can tell its been fixed but on the car you wont be able to see it at all, This is the WORST rim of the bunch, all the others look pristine, these are 18" X 8 35 mm offset. The diy was alot of work but I think it turned out really well, sorry the pics arent better I had to use a crappy quickcam to get the pics. these are "flick " rims Lex model & weigh 21#s these are good rims, first $550 gets them shipped. thanks

this is the worst part. it was pretty bad, this is a vast improvement believe it or not. this is as bad as it gets on any of the rims, and this is the only spot really

<img src="http://photos.e46fanatics.com/data/500/3280rimfix3.jpg">

these are pics of the refinished lip, both these places had rash on them, as you can see they look pretty good, this is how ALL of the rims look except for the one spot shown above
<img src="http://photos.e46fanatics.com/data/500/3280rimfix4.jpg">
<img src="http://photos.e46fanatics.com/data/500/32801.jpg">
<img src="http://photos.e46fanatics.com/data/500/3280attachment.jpg">
 
1 - 10 of 10 Posts
Top