Hello, guys! A month ago I had both camshaft sensors fail and my vanos unit developed a rattling. Few days ago I repaired the unit using beisan rattle/seals kit and changed both my sensors with second hand oem ones. Everything seems ok except if I stop the car and start it right away it picks up...

I just joined this forum, and this is my first post, put I already have a few questions. I had a couple of oil leaks on my 2001 325i. I replaced the valve cover gasket, which I hoped was the source of the problem, but now I also see that my oil pan is also leaking. I can actually see little...

How can I tell if my seals are going? My 2004 325i 5sp has about 145,000 miles on it and I'm assuming that the vanos seals have not been tampered with. Like I have said before, the hesitation/jerking is most notable in 3rd gear from 2,500-3,000 rpms. I need some help in isolating the problem...

Hi Gentlemen! I am totally new at this forum. I think I am in the right place to ask my question because a lot of You have an experience with VANOS and somebody might give me a good piece of advice. So I recently bought my '02 330i and totally fall in love to this car <3 But so far I have a big...

So I realized the Vanos system seals have worn down in my car leaving some issues when the engine is cold and idol not been right. The new seals were needed rather then re purchasing the Fault Vanos system from BMW I did some reasearch and found the only way to correctly fix this problem was to...