E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-3 of 3 Results
  1. E46 M3
    So I slid straight into a curb sideways, snapped NSR rear trailing arm, upper control arm, driveshaft, and bent camber arm.. I've definitely bent the frame where the trailing arm connects as you can see a kink in the rear quarter, any idea if the frame is repairable? Also the rear subframe...
  2. E46 General
    Cant get this out...tried: 1) cutting 2) Autozone press 3) c-clamp 4) drilling out the ball joint 5) hammering it to hell 6) Using PB blaster The eccentric bolt was stuck and we cut it off but still can't get out the ball joint. Update: I finally got it out! I used the tool in the middle...
  3. E46 General
    :censor: trailing arm is so much :censor: money. Does anyone have any suggestions on where to get a cheap one. I'm seeing them for like $600 -$800 HELP!!! :ben::ben::ben::ben::ben::ben:
1-3 of 3 Results
Top