E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-15 of 15 Results
  1. Motorsports, Track
    Does anyone have experience with these? I have a mostly-dedicated track M3 (I drive it to/from the track, but it lives on the track) that is looking at a complete engine teardown and rebuild this winter for other reasons. I'm viewing this as an opportunity to make some improvements, and these...
  2. E46 General
    Hey everyone, Have an issue with my 2004 330i that I'm hoping I can get some 'ideas' and things to check to find the cause. Read many of the older threads about oil level sensors leaking. The car has 154k miles and it does see track time and have been having it maintained by a local specialty...
  3. Motorsports, Track
    Heya E46 Forums! As stated i'm a complete NEWBIE, who've just purchased my first E46 320i. Its a 1999 2.0 (M52B20.. i assume) 174k kms. I've done a bit of track driving, and some spirited daily driving ;) in my dad's Volvo V60 T6 with some polestar mods. Now i wanted to get into it properly...
  4. E46 General
    Hello BMW world, I'm a new guy to BMWs but my brother and a few of my friends have had them for years. Anyways I wanted to get into autocross and track days, so on Craigslist I found this 01 325 it had 2 engines and 3 trans and a ton of parts, got it for a steal. The interior is mostly gone, no...
  5. Motorsports, Track
    Hi everyone, I've just bought a 2000 e46 330ci with the aim to turn it into a track car but with a budget in mind so I'm not going crazy. My idea is to strip weight, buckets seats/harness, upgrade brakes, add some decent coilovers at some point and then things like decent tyres. The other idea...
  6. Motorsports, Track
    I am new to the forum as of this afternoon, this seemed to be the most appropriate area to post my initial inquiry. My son and I are looking for a used E46 that we can work on over the next year to then use at various track events in the mid atlantic area. We live in Greensboro NC, which is...
  7. Motorsports, Track
    Im looking for the best/cheapest bolt in cage for a e46 328 saloon, suitable for racing and track days. i am open to weld in cages too but would prefer a bolt in cage for ease of fitting and removal. can anyone recommend a cage for me to look into as am struggling to find an "off the shelf"...
  8. E46 Showroom
    Got tires on the new wheels and finally had them mounted up... 18x10.5 Square, R-comp Tire. Front fitment: Pretty good considering I'm not at my race camber setting, and my fenders haven't been touched. Rear fitment: I could run a spacer to push it out more, but I'll probably leave it as it...
  9. E46 Showroom
    I went to the track with the guys at Platte Forme A.G. to Buttonwillow recently. They were out there testing their new aero package for the E9XM3 chassis. They were definitely out there working/testing their cars, the E90M3 had the race splitter installed when they first came and after a couple...
  10. E46 Showroom
    Since the car was freshly detailed, we decided it would be a good time to throw on fresh vinyl for this years competition. This year we're trying to stay focused with a set of "core" set of sponsors rather than throwing a ton of vinyl on the car and having some get lost in the sea of stickers...
  11. E46 General
    Do you think he could have easily passed the challenge car? http://www.youtube.com/watch?v=GGVlP5F96k8
  12. E46 M3
    I finally had a chance to type up this post.... Prior to Super Lap Battle I revamped my car so that it can be 100% for the competition. On the list was to revise front aero, rebuild/Balance Motons, and most importantly repair/reinforce my subframe + bushings. I got a care package from TMS...
  13. Suspension, Brakes
    I finally had a chance to type up this post.... Prior to Super Lap Battle I revamped my car so that it can be 100% for the competition. On the list was to revise front aero, rebuild/Balance Motons, and most importantly repair/reinforce my subframe + bushings. I got a care package from TMS...
  14. E46 Showroom
    Our customer Ethan recently acquired Z4MC and as any new owner he did not waste any time to put his own style/touch on a fresh "blank canvas", he drove the car down from Washington and we quickly went to work on his car. Ethan wanted a car that was simple/clean yet had a touch of...
  15. Forced Induction
    Follow us on Facebook for the latest updates!! www.facebook.com/rennspec VT2-500 Install/Review I'd like to start off saying that ESS puts together an amazing SC kits that are nothing but top notch quality, I've installed a variety of ESS SC kits and each and every one of them have been 110%...
1-15 of 15 Results
Top