E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of October's Ride of the Month Challenge!
tech help
1-6 of 6 Results
  1. DIY: Do It Yourself
    So there was a recent thread (Archbid?) about having to timesert (sometimes twice) threads during the course of an engine refresh. He had asked about the possibility of his torque wrench being bad or operator error? I've been using torque wrenches and drag meters of all flavors for decades...
  2. E46 General
    Long story short, started her up, engine idles good but revs quite ”heavily” and takes long to start. After revving the engine it stalled and i just went home because i was as tired as possible. Any ideas what to check for tomorrow?
  3. E46 General
    SOLVED at #5. Bought a 07/2000 323i Sedan in December. 108,622mi and not going up. Speedo is inop, dsc, abs, brake lights. Zero communication with ABS Module using MaxiDas diag. DME recognizes issue, 5200rpm rev limit. Cleared code, got rev limit back until I put the car through the revs in...
  4. DIY: Do It Yourself
    My goal is to give a reasonable survey of the types of clamps that are used, how they are used, their names, and brands. Over time I hope to assemble good non-BMW sources for reliable parts. All clamps become loose in time. One usually blames the clamp from unscrewing or the like, but this is...
  5. E46 General
    Bimmer family, this is not what i wanted for a first post. I purchased a one owner (BMW salesman) manual 2000 328i with 177k (daily driver of 170 miles a day) last November and have no issues. The previous owner was up to date on everything and i wish more people selling cars would exercise...
  6. DIY: Do It Yourself
    I know the world likely doesn't need another torque guide but I have been keeping a doc on my iPhone that I use when I am restoring E46s. I have leaned heavily on the two big efforts in the past: The Ultimate e46 M54 Torque Specs Thread Ultimate BMW E46 M3 Torque Spec Guide This is also...
1-6 of 6 Results
Top