Hi, was wondering if there's a part number for the little plastic spacers that are on most of the A/C pressure hoses. I'm replacing the whole system, and most of them were so brittle that they snapped off when pulling the hoses out. Here's a pic of what I mean (it's the yellow plastic spacer...
The idea is you tap a snug fitting socket into one of the lug holes and tap it up/down with a hammer to effectively rotate the spacer free. Just wiggle the socket out of the spacer when you are done. Sorry for the bad filming!!
ALL H&R products are on sale 5% off till 1/2/12. So whether you've been thinking about using some Track+ Adapters to mount those 911 wheels on your bimmer, lower your car with a set of H&R Coilovers, or dial in your suspension with H&R Camber plates you can save as long as you act fast...
Ok, so I want to order these 12.5 mm spacers
Now I've searched the forum about bolt length and I found some posts say 35mm for 12mm spacer, some 40mm.
Can you tell me guys what bolt length I need for 12mm spacer?