E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of December's Ride of the Month Challenge!
1-4 of 5 Results
  1. E46 General
    There are lots of DIY for control arm bushing replacement. There are two tricky parts to the job: get the old bushing off and getting the new one on. To get it off I used a knife to cut the rubber and took off the outer metal sleeve, then I used a gear puller to pull off the remaining plastic...
  2. E46 General
    The OE speakers in my 02 325i practically disintegrated in my hands when i took them out. The horrible result was that , what i assume to be the petroleum based rubber around the cone, fell apart into tons of tiny bits onto the rear deck. The vacuum got most, but the rest got smushed and has...
  3. E46 General
    Does anybody know if it is possible to replace rubber gasket that goes AROUND the windshield without replacing the whole windshield. It appears to be the case for 5 series (there are numerous threads on bimmerfest). Texas sun has cooked mine and i I can literally peel away pieces of the rubber...
  4. E46 General
    Hi Everyone, I have a 2001 330ci. If you open the trunk, and then lift up the mat that covers the spare tire, there is rubber hook/latch that you can use to keep the mat up while taking out the spare tire. I have broken this strap/latch/hook.. whatever it is. I cannot find a replacement...
1-4 of 5 Results