E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. E46 General
    Hey guys, I'm going to replace my rocker cover gasket this weekend on my 325ti and I'm just wondering if these 'Loctite 5990 Premium Silicone Copper Gasket Maker/Sealant' would do the job when applying to the 4 corners? Any help appreciated thank you.
  2. E46 General
    About how thick/wide of a bead should I put down when resealing the rear diff cover? I am using Loctite SI 5970 but the instructions don't specify bead size and neither does newtis. Meanwhile, the Bentley doesn't even address the rear diff cover removal/installation at all (chapter 331). I...
  3. E46 General
    Please, don't RTV as DISA valve, it won't work and you could do more harm this way. This image is a couple minutes after I began to clean it with a razor blade, but I'm pretty sure this was my vacuum leak along with my intake boots. Also a tip for anyone else who is struggling with cleaning...
  4. E46 General
    OK so my disa failed. And since I'm short on cash, going to simply take out the flap and pin. Now my question is can I use some rtv I have from my vcg to create a new gasket? I know I should replace it but I am a college student, on my own, strapped for cash. I'm not looking at this as a...
1-4 of 4 Results