E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. E46 General
    BMW E46 325CI 2005 I have a very urgent question I just replaced my rear wheel bearing and hub a couple days ago i messed up the hole for the set screw for the ebrake assembly for the shoes to hold in place so i took the whole ebrake assembly apart because now i need to replace my dust shield my...
  2. E46 General
    So recently I was driving and noticed a loud thumping kinda noise in the right rear wheel, happens when I step on the gas. Bad wheel bearing or tires? It’s only when I step on the gas, it’s normal when I go below 30mph
  3. E46 General
    Hi there. I have 2003 320i and it snowed in bc a couple of days ago and so there is ice under my car. I tried getting my car out but it was skidding so therefor i turned off dsc and progressed to slowly accelorate to no such luck. After turning the car off and trying again i noticed that dsc...
  4. DIY Guides
    Alright, I have searched and found no similar problem so I am reaching out to all of the loyal and great e46 ers. I had to cut my hand brake cable to cut it off when I took my trailing arm off. It was seized on the trailing arm and the cable would not pass through the channel by the...
  5. E46 General
    Rear Wheel Bearing DIY - Half Shaft Axle Stuck to Hub - What a Pain!!! I've add more pics of the process!!! This was Harbor Freights 5 ton hydraulic puller. Don't waste your time. <br> <img src="http://forum.e46fanatics.com/attachment.php?attachmentid=326706&d=1249871858"> <img...
1-5 of 5 Results
Top