Is your BMW Xdrive shudders at low speed while steering left or right from standstill , followed by jerky acceleration and makes chugging noise or kind of a shaking?? You just have to recalibrate your Transfer case, watch how in video below 👇 !

Hi all. I want to share my experience with BMW coding. I have used scan tool Launch X431. Unlock all doors when car stops and turn off the engine” In order to code that option you need to access CAS module of your BMW and change it to ”enable” You can also change your preference if you whant the...

Hi all !!!The system Auto Start / Stop in my cars (BMW series 1 and Series 3 ) is simply disable :cool:. In my opinion this system , takes you more ,than gives you some advantages , so I used scan tool Launch X431 and I disabled this car's option .What do you think and What is your opinion ...

Hi all , I am going to show you how to code with NCS Expert and our task will be to setup the radio frequency of your BMW . This video will be very helpful for those of you who import bmw cars from USA, Japan, Europe. For example - the FM broadcast 📻 in the United States starts at 88.0 MHz and...

Hi everyone 🤗 !!! I decided to share with you how to create a profile with NCS Expert, instead of searching and downloading existing one. I will just show you 👇👇👇 how to create expertmode profile in NCS Expert so you are able to program and code your BMW with NCS Expert.

So I couldn't find anywhere to get a copy of PA soft that didn't sketch me out a little bit, and the official website has been shut down for a few years. Is there a new tool that we use for the e46 or something?

Just want to preface this thread with the standard "I've done the research" disclaimer and that I'm familiar with the process of making a used cluster match the mileage and VIN of one's own car. Two great tutorials can be found here...

Alright, so I currently have a new cluster in. orange break light and DSC light are on and I still can not figure out how to turn it off. I have swapped the m35050 chip from the original board to the new board, so the VIN matches and have reset the Steering angle sensor by going from lock to...

Hi Guys my first post so please bear with me. My son has a BMW 2000 318i (manufactured in 99 but Aussie imports are marked 2000) The car has had problems since it was bought. Namely the battery would go flat and every few weeks the transmission would change gears very very abruptly. Not like a...

I have been told by multiple people there are codes that are more option specific and that these can be broken down into key specific options that I quess would put seat and mirrors in place for the person who carries that key if you shared the car which I do not. Then there are code/ option...

Hi I was wondering if anyone could help program the LCM. It seems like the car was not programmed correctly when there was either the bi-xenon or xenon retrofitted into the car.

I just got a brand new instrument cluster from BMW. Would it work right after you install it or would you have to program it? What needs to be done to get the same amount of miles on the new cluster? Thanks.

Hey guys, I had a previous thread about this but it disappeared over the past weekend (maybe related to the server issues?). Just want to give a shout-out and thank you to 99FRC (now aaeurocoding here on the forums) who hooked me up last weekend. I originally wanted to just have it so my fog...

On my key fob, I have special actions programmed. For example, if I hold the UNLOCK button on 2nd click (unlock) all the windows go down 1 at a time (releasing the button ceases this process) if held to completion all windows and sunroof are open...I was wondering if there is a post/pdf/tutorial...

I've tried searching this to no avail. Even the dealer provided only basic advice (didn't work). Understand I can have my keys automatically be associated with specific driver settings. I drive the car 99% of the time, but occassionally the wife will use the car. We've programmed the seat to...