E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Motorsports, Track
    Hi so i got a fiberglass duckbill and im wondering how i should start paint,primer,bodyfiller ETC. As you can see it has quite alot of imperfections and i'm looking for advice on how to proceed. I'm thinking of starting to sand with 800grit then maybe use high build primer then maybe do the body...
  2. E46 General
    Hi so i got a fiberglass duckbill and im wondering how i should start paint,primer,bodyfiller ETC. As you can see it has quite alot of imperfections and i'm looking for advice on how to proceed. I'm thinking of starting to sand with 800grit then maybe use high build primer then maybe do the body...
  3. E46 General
    Hi! I really need some help. I've got a 2005MY 320D, which, about a month ago wouldn't start. I towed it to my local BMW workshop to have the problem identified, and after a while they told me that the pre-supply fuel pump was faulty and needed replacing. Being young and a student, naturally I...
  4. E46 General
    does anyone know the color of our primer? I just pulled the bra off my car, and he's got some paint chips that go down to a black layer. If that's primer, is there any way I can touch it up? The chips are reasonably sized, probably about a square inch. They're all on just the bumper, not the...
  5. E46 General
    I own a bmw jet black 325i and, I recently purchased a bumper (silver) and want to sand paint and clear coat it myself. I am going to order the supplies from automotivetouchup.com. I figure the jet black will be matched perfectly. Any tips or suggestions. I have heard of rubberized primers...
  6. DIY: Do It Yourself
    :help:I have a bumper that needs to be painted. I am wet sanding and priming, but I need to know if the Duplicolor" black will match the jetblack bmw factory paint? :dunno: Any advice on primer:read:s and painting coats?
1-6 of 6 Results
Top