E46 Fanatics Forum banner
peake
1-9 of 9 Results
  1. E46 General
    OK folks hope you can help me with my problem on my 14 year old 330ci with 122k miles on the clock. I've been getting the check engine light with P0171 and P0174 codes, over the last 20-30k miles, with it gradually coming on more frequently. Initially the light only came on in winter and on a...
  2. E46 General
    This thread is for posting if you have a BMW-specific Airbag Scanner and Reset Tool to lend (or sell). Post which year and model cars it is designed for, and where you live. OK to charge around $5-$10/day 'rent' to help pay for the very rarely-used tool, which will help lender's cost recovery...
  3. BC, AB, Saskatchewan, Manitoba
    I recently purchased a Peake Research - R5/SRS-16 Airbag (SRS) Scan/Reset Tool. I live in the Calgary Area and you can come by and borrow it if you need to clear your SRS warning light. http://www.peakeresearch.com/srstool.htm Cheers
  4. E46 M3
    Any one in the Clarksville TN area that has a Peake Reset tool for the airpbag. Need help getting the light out, removed seat in my 2003 M3 without battery being turned off and light is now on. Nashville, Bowling Green Hopkinsville are all close by. Just name your Beer. Thanks Dallas
  5. E46 General
    I've searched all over and can't seem to find an answer to my question. I have a service engine light on so I ordered the Peake tool after reading everyone's posts on here. I hooked it up and after I press go with Fc, the following numbers come up: 19, 10, 8d, A8 Am I correct that this means...
  6. E46 General
    The airbag light is on in my wife's 1999 323i. I'd normally have no problem buying the code reader from Peake for the airbag but money's in short supply right now. I own their engine code reader and think it's a great product, but just don't have the money right now for the other one. Is...
  7. DIY: Do It Yourself
    First off. I have seearched all over this forum and have tried useing a wire to short pin 7 and 19 for 3-5 secvonds in position 1 and position 2. have tried to access the onboard computer via OBD2 and using the dashboard. holding the left botton and putting it into position one seeing the test...
  8. E46 General
    My car had a check engine light for about 12 hours.... the car drove fine with the CEL, but right before the CEL it felt like stalling and I was just standing in my driveway in N. Anyway, after driving around some, the CEL just went away... maybe after driving 100 miles. I still got the car...
  9. E46 General
    Well, I just recently purchased a Peake Tool from Bimmertools this weekend, and today I finally got a chance to put it to good use. I had previously purchased it to shut off my check engine light that came on after the upper intake tube on my K&N filter came disconnected from the lower intake...
1-9 of 9 Results
Top