p1347

Hi, I am getting Cylinder 3 misfire with fuel shut off randomly on cold start ups. I can feel the misfire and, if I turn the car off and then back on, the misfire goes away. I have checked my coils and plugs and those seems fine. The misfire starting occurring after I changed the valve cover...

I apologize in advance that this is a bit long but I wanted to give you all of what I did so you get the whole picture. When my 2002 325ci started running bad and would not stay running I pulled the codes which said MAF sensor and vacuum problem (forgot the exact codes). I knew when I bought...

PROBLEM A I won't be able to start the car up until I get a replacement starter. Before that exploded on me, I was getting the following codes. The car would also shake at idle and low-rpm power was awful. Here's what my Autel MD-802 gave me. Codes were in this order: P1347: Misfire cylinder...

I'm having a rough idle, stalling with my MAF connected (multi random misfire codes). I've replaced CCV and hoses, upper and lower boots, several vacuum lines at rear of manifold. However the vacuum listed as #9 in the diagram is off. I've searched for days but can not find out where it goes...

Let me first say that I have been searching this and other forums to see if I could fix my problem. I know that it is a cylinder #3 misfire. I just changed the spark plugs back in December when I had a cylinder #5 cold start misfire (cant remember the code). This started about a week ago...