E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-7 of 7 Results
  1. E46 General
    Hey everyone, Have an issue with my 2004 330i that I'm hoping I can get some 'ideas' and things to check to find the cause. Read many of the older threads about oil level sensors leaking. The car has 154k miles and it does see track time and have been having it maintained by a local specialty...
  2. E46 General
    Hello guys, this is my first post here and I've heard good and bad. So hopefully this won't become the bad. I've read a good bit of threads from Google Searches pertaining to the multiple different Yellow Oil light indications you may get. Some due to faulty sensor, some due to oil levels being...
  3. E46 General
    Hey all, I just replaced my oil level sensor on my 05 330i ZHP because my light oil light was not coming on at all when the level was low. I bought a new Hella sensor, but after installing, it is still not working. Is it possible that I got a bad sensor or could there be something else that is...
  4. E46 General
    My red battery light was on the past few weeks even though the voltages were fine. It turns out it was caused by a bad oil level sensor that was blowing fuse 30. I've been doing a lot of research the past few weeks and I didn't see many stories quite like mine, so I thought I'd share: What...
  5. E46 General
    2003 330i msport m54 auto. Ok so i was driving and stopped at a red light. took off normal and noticed my car wouldnt shift out of first. so i pull over and shut her down. Turn the key in the on position and all lights came on normal, BUT no range selector on the dash. turn the key....no...
  6. E46 General
    About a year ago I replaced the oil level sensor on my '00 328 / 130k, as it was coming on after startup. I've only driven about 5k since then. Last few weeks the oil light has been coming on after 10-15 mins of driving, or coming on after switch off. Oil is definitely at the correct level -...
  7. DIY: Do It Yourself
    Hi, I just saw a thread with someone wanting a general idea on how to replace your Oil Level Sensor. Here is my DIY on how to do it. I would say on a scale of 1 to 10, this was really easy to do. Maybe a level 2 just cause taking off the metal panel and then trying to re-install it by myself...
1-7 of 7 Results
Top