E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. E46 General
    Hi, was wondering if there's a part number for the little plastic spacers that are on most of the A/C pressure hoses. I'm replacing the whole system, and most of them were so brittle that they snapped off when pulling the hoses out. Here's a pic of what I mean (it's the yellow plastic spacer...
  2. DIY: Do It Yourself
    hi everyone. i have a 2001 330ci with manual transmission. am in the middle of installing the master cooling kit. getting ready to install new radiator, hoses and expansion tank. in the box that contained the new radiator, there was a a plastic bag with three O-rings (two larger and one...
  3. E46 General
    At about 210,000 miles last month it seems my motor turned into a shower head of oil. First I noticed oil leaking from the Oil Filter Housing. I changed that gasket, along with a new O-Ring for the Oil Filter Cap. Then I changed the Valve Cover Gasket which was getting bad. Things were good...
  4. E46 General
    I am asking because my evaporator and expansion valve have been replaced last year. So I was going through the receipts and they only show evap core, expansion valve, dryer, refrigerant, and labor. wtf happened to the o-rings lol
1-4 of 4 Results