E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of this month's Ride of the Month Challenge!
ncs expert
1-12 of 12 Results
  1. General E46 Forum
    I have an 03 325i with the GM AT. The cluster was swapped from an ‘02 with less miles. I was trying to fix the FA, clear the tamper dot, don’t know wtf I did . . But the issue now is the DME. Temp gauge goes full hot when you turn ING on. Cranks fine, no start. There’s no CK ENG LT, trans is in...
  2. General E46 Forum
    Hello, I've recently downloaded NCS Expert and tried coding out all of the front light checks cold and warm, to remove the warning from my dash (no bulbs are actually out, I believe the low and high beams have been changed to LEDs) however the lights still remain on my dash? Any advice or help...
  3. General E46 Forum
    Hello, I am trying to connect my ncs expert to my e46 323ci 00. When I try to read the vin with revtor's ncs expert profile I get a long list of errors what could be the issue for me? Do note that inpa is working perfectly and there are only problems with ncs. I get the same errors from all the...
  4. General E46 Forum
    Now tools like OBD Fusion and PA Soft might all be part of your arsenal for an e46 but there are times when neither of these will do the job. Good examples are Brake Module replacements, or Steering Angle Sensor calibrations. This is why every e46 owner needs a working copy of dealer level...
  5. General E46 Forum
    Hello Guys, First, I like to thanks everyone who created and gave us the consumers the option of working with BMW tools such as NCS Expert, Inpa etc... To gain certain options can cost $$$$ dollars and as a DIY guy I love to understand my car to its limits. I've tried searching for the issue...
  6. General E46 Forum
    Hello everyone, I am new to this forum but have taken a lot of notes from here on fixing my E46 coupe, Thank YOU!!!:excited: I have also searched online and in here allot to programing ZCS module for LED tail light. However, the information i found wasn't to my production. As I am sitting...
  7. General E46 Forum
    I have a '05 330i that came with Halogen ZKW headlights. I retrofitted my low beams with Bi-Xenon HID Morimoto Mini H1 6.0 Projectors. I'm using OPT7 Bolt AC SLIM HID Xenon Conversion Kit. Everything works fine as long as I put the capacitors that came with my HID kit between the stock headlight...
  8. General E46 Forum
    So over this weekend I decided to install NCS expert on a laptop to try to code my 2005 M3 coupe. I cannot seem to open windows with the remote key. My options are set as following: KOMFORTOEFFNEN_FB_O_FH_HI :remote opens rear window nicht_aktiv KOMFORTSCHLIE_FB_O_FH_HI : remote closes rear...
  9. DIY: Do It Yourself
    Hello all, here's my situation. I just purchased an e46 from my boss, and the car works fine, fairly new transmission and engine; The problem is he switched the transmission from auto to manual. My job is to figure out how to recode the transmission using ncs expert. If anybody could help me, i...
  10. General E46 Forum
    My 05 325i sedan can already lower the lower all the windows and open the sunroof with they key but i how do take this off and have it only lower the driver and passenger window. on NCS expert Translation "KOMFORTOEFFNEN_FB_O_FH_HI" is used for Comfort opening (power windows without rear side...
  11. Driveline, Engine & DME Tuning
    car 323i 99 AT 253K+ miles. So, after coming home form work yesterday I deiced to tackle low+high+fog lights coding with ncs expert changed in GM FH_ABSCHALTKRITERIUM ece FH_ABSCHALTKRITERIUM worked, moved on to the LSZ PROGRAMMPARAMETER_LSZ_1 ece PROGRAMMPARAMETER_LSZ_2 ece...
  12. NY / NJ / CT
    Looking for an NCS expert tech in ct to do zcp m track mode retro,comfort and one touch closing of the windows,enable auto fold mirror circuit. I am tempted to get the software myself but would really like someone experienced to do it instead. Post here or pm me if you or someone you know is...
1-12 of 12 Results
Top