So I currently have an issue whereby Iv broken the expansion tank mount where the ET top hangar is meant to hang on to. Could this be the reason why I can't seem to get the Expansion tank to seat no matter how hard I push down ?
I've a 2003 325i Sport with manual transmission. The front part of my exhaust configuration consists of a twin pipe that bolts directly to the manifold twin pipes and is held in place by bracket that mounts onto the transmission housing. This bracket is connected to the exhaust via a single bolt...
I am in the process of completing my halogen bi-xenon retrofit with Morimoto H1 3five kit from TRS.
I would like to know how to mount the ballasts to the headlight before I take out my old headlights.
I know that the OEM ballasts have a mount on the headlight itself, but they point up and...
APEX is excited to introduce our new Performance Services division, with our first location now open in Dublin California. As with our products, we are concentrating on Street, Track, and, Race services.
With our experience in complex fitments and car setup we saw an opportunity to develop...
I have an aftermarket CF hood, and being that I don't trust my half-not working stock latch, I have picked up a set of hood pins, and I'm wondering if anyone knows the best place to mount the anchor bolts that would stick up and go through the hood and that the pins would slide into...
First Aid Box
Installation Guide (DIY):
Things you will need:
-2 #10 or #12 3/4" sheet metal screws
-Short screwdriver with a flat tip
-First aid mounting bracket
-First aid box
1. Prepare your materials. Lay them out; Take of stickers, repaint (if wanted or necessary), & wash if...
Hey all, :hi:
Just finished upgrading my OEM HK Nav system to a fully aftermarket (ok ok, not speakers...not yet :-p ) system.
Now i have to mount my big ol' amp in the trunk. it fits in the OEM GPS computer/amp/dsp spot at a 45 degree angle.
Should i just bolt it to some mdf, or should I try...