E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of September's Ride of the Month Challenge!
miss fire
1-3 of 3 Results
  1. E46 General
    Hi so I’ve done an engine swap from a 318 to 330. I have endless problems. so I started getting a miss fire and was showing cam shaft sensor so put a new one on code went but then I started getting 4 miss fire codes and it’s driving with no power. I then took it to someone who thought two bad...
  2. E46 General
    I have been having a problem for the past 6 months, where I have been getting misfire on all 3 cylinders on a single bank at idle. When I am driving, I can't tell if the misfires are present and car seems to feels fine otherwise. I have taken in the car to a few different Mechanics and one of...
  3. E46 General
    So I've been having a problem with cyl 6. Looked around on the forums and found some answers but i dont know where to go from here now. So far I have replaced the ignition coil, spark plug and the intake boots. cleaned the throttle body and ICV while i was doing that. I had to remove disa to...
1-3 of 3 Results
Top