E46 Fanatics Forum banner
manifold
1-20 of 20 Results
  1. E46 General
    Hi everyone, long time lurker but I now have something to post so here goes. I own a 2000 323i E46 (some 246,000kms) with an engine that's in tip-top shape, no oil consumption whatsoever, no nothing. I had the classic misfire issues caused by vacuum leaks and a broken PCV system, but other...
  2. E46 General
    Hi gentlemen, I did a starter replacement job a while back. Have an xi AWD so it was easier for me to get to it from the engine by removing the intake manifold than to go from the bottom due to the diff and other extras down there. I took off the manifold, replaced the starter, while I'm there...
  3. E46 General
    Hey guys. New to the forum, not new to BMW's. I have a 320i Touring with the 2.2L motor. I have the opportunity to grab the full intake off of a 325ci. So I'm wondering if there are any sizes differences in the 2 manifolds and/or throttle bodies? If there are, i'm definitely not expecting...
  4. E46 General
    I needed to remove the cylinder head and was having trouble removing the exhaust manifold the way the Bentley manual described, so I was able to remove the head with the exhaust manifold still bolted on. You need to be pretty strong to lift the whole thing out at the awkward position you're...
  5. E46 General
    Hey guys, would it be worth it to remove my intake manifold during the winter? I have a coolant leak right under it, and Im pretty certain its coming from the heater hoses. I already have the o rings for the hoses, but I still need to order the manifold gasket. How many hours approx. did it take...
  6. Engine, Driveline, Tuning
    Before anything, I did try searching for a bit before posting this. Car is a 2002 325xi sedan I had my headgasket let go on me yesterday, and the car is currently in the shop. As long as the head bolts don't strip in the block and the head is not cracked we will just resurface the head and be...
  7. New York, New Jersey, Connecticut
    I recently did an engine in a vehicle and have some parts available for people looking to hop up their E46 or E39. I have an M54B30 intake manifold available. This is in good condition without any cracks or missing pieces. I can include it with the injectors, throttle body, DISA, and CCV if you...
  8. Driveline
    I recently did an engine in a vehicle and have some parts available for people looking to hop up their E46 or E39. I have an M54B30 intake manifold available. This is in good condition without any cracks or missing pieces. I can include it with the injectors, throttle body, DISA, and CCV if you...
  9. DIY: Do It Yourself
    I removed my swirl flaps and cleaned out my intake manifold yesterday (thread @bimmerforums - http://www.bimmerforums.co.uk/forum/f18/2003-e46-320d-swirl-flap-removal-intake-cleaning-t277393/#post1838737), and after putting everything back together the car started beautifully. Before it...
  10. E46 General
    Hey everyone, does anyone have a 330i,xi or 328i header laying around where they could take some detailed pictures about the measurments of the flange? In the next coming months I will be peicing together a turbo setup on my 330xi and I want to make a upward facing turbo mani that will be placed...
  11. Driveline
    FOR SALE - BMW E46, E36, 323, 325, 328, 330 FULL COMPLETE TURBO KIT SHOULD FIT ALL 3 SERIES E46 AND E36 WITH 6 CYLINDER ENGINES/MANIFOLDS For sale is a complete turbo kit for a BMW e46 and e36. It is brand new and never used or bolted on. Genuine reason for sale. This was purchased...
  12. Engine, Driveline, Tuning
    The car runs fine so I have ignored these codes for a while now but smog is due so it is time to fix. These codes indicate a lean condition which is usually attributed to a leak in the intake system. The usual suspect is the DISA valve or the intake boots. I used this opportunity to build a...
  13. DIY: Do It Yourself
    Hey Guys, So I'm in the proccess of putting in my new headers. I wanted to it right so I got all new gaskets. However all threads tell you to buy more studs for the new headers, but my gaskets stagger the holes for the original manifolds. Should I drill the extra holes. If the orignal manifold...
  14. E46 M3
    Hey guys, I have been working on this project for the last month getting all of the pieces together to make it drivable: -OEM Manifold -K&N Air Filter -Vacuum Line to Brakes -Alpha N tune -IAT Senor My goal for this manifold was to make it the induction noise of the car LOUD. The videos...
  15. Driveline
    Got a couple engine parts for sale........ 1. Intake plenum from M54B30...bolt on power for 323/325/328, great shape, no DISA, $250 2. Stock oil filter housing from M54...fine shape, $90 OBO plus shipping from 48335. Cheers.
  16. Driveline
    all gone except exhaust cam/tray
  17. Driveline
    i have 2 of these manifolds that were made for e46 m3....these go for 800+ brand new, so im letting it go for 600 dollars brand new (never used).... claiming to increase horsepower with a tune 60+hp comes with airfilter too
  18. E46 General
    I noticed the rattle sound while sitting at stop lights. It sounded like a loose heat shield but I popped the hood and noticed it was coming from the intake manifold. It only happens after the car has warmed up for a few minutes and while its in drive. No noise at all in park or neutral. I've...
  19. E46 General
    So I just got my headers in the mail yesterday from Trader-NAS via Ebay and I'm really looking forward to getting them installed on my car. I'm not going to be installing them myself since I'm too busy with work for the next couple months, but I still want to make sure that I get the...
  20. Engine, Driveline, Tuning
    Yep, you read right. 1st off, supercharging - yeah, I know, but that's not what I'm here to talk about. 2nd turbocharging - yeah, even if someone makes a kit I can't afford that either. NOS - no, way, I don't do drugs. So now that that's out of the way, let's talk about bolt on mods. I have the...
1-20 of 20 Results
Top