E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-2 of 2 Results
  1. E46 XI
    I am ready to press new OEM bearings into front knuckles of my '05 325xi. Bentley manual says to use Loctite 648 (Green) and to cover half or better of the outside of the bearing shell. In disassembly I could tell that the factory did this - there was residual cured excess Loctite in the back...
  2. E46 General
    I'm getting ready for a automatic transmission fluid/filter change and I am planning on reusing my bolts. Bentley notes, use new sump bolts or coat with Loctite. Those of you who have done this job, have you used your old bolts? Which version of Loctite did you use? I heard someplace "medium...
1-2 of 2 Results