E46 Fanatics Forum banner
kenwood
1-6 of 6 Results
  1. New York, New Jersey, Connecticut
    *SOLD* JL Subwoofer 12" W6 w/ Kenwood amp for the sub/ Alpine 4-channel amp LOUD SOUND SYSTEM. This is a perfect setup for loud bass and good sound quality. JL Audio 12" W6 in a sealed carpeted box with 500 Watts Kenwood KAC-9102D mono subwoofer amplifier (500 watts RMS x 1 at 4 ohms) for the...
  2. Electronics
    First DIY, so here goes…After owning our 2003 325i sedan for 10 years, I felt it was time to upgrade the radio to have Bluetooth, USB, and play MP3s. I also needed new front low-range speakers because one of them popped. I’m not familiar with putting in radios or speakers, so I went to...
  3. Electronics
    Hey folks, I'm looking for some input on what direction I should go with the audio in my car. First, my current system consists on the 'upgraded' (HK) system and OEM CD player. I discovered the previous owner had the Icelink iPod adaptor installed, more on that in a second. Second, I'm not a...
  4. E46 General
    Hey Guys, Was wondering whether it was possible to have my factory head unit which the the amp and the sub ive listed below?? http://www.soundmaster.com.au/Pioneer-309D4SB-12inch-Subwoofer-Enclosure/309D4SB.asp...
  5. E46 General
    Hi guys, I've bought a car with an aftermarket Kenwood stereo and it seems to cut out at randim between 30 seconds and 5 min after switching it on. I don't change the volume or use the CD player, so the power consumption is minimal. The only thing that restarts the radio is the hard restart -...
  6. DIY: Do It Yourself
    DIY kENWOOD KVT-512 ===>PAC OEM2 Converter ===> Wiring Harness Wiring After several hours on this forum researching for a way to wire all my connections for my new Kenwood KVT-512 I just gave up since I did not find a clear explanation of how to wire it down !! So I went to the Car Stero Shop...
1-6 of 6 Results
Top