E46 Fanatics Forum banner
intake manifold removal

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. E46 General
    Looking for input and recommendations due to the location of this coolant leak. I'll have to pull the intake manifold. That being said, is their anything else y’all would recommend I replace while im at it? 2001 330i 233k miles Also have a massive number of codes coming up so all that is on...
  2. E46 General
    This is all because of those hated P0491-2 codes... After trying everything in my power to dislodge the vacuum solenoid from the back of the manifold (including trying to snap off the damned clip), I'm just going to do the intake manifold removal and attend to the CCV stuff, the gaskets and...
  3. DIY: Do It Yourself
    Greetings all, I recently replaced the CCV on my 2005 325i and chose to do so by removing the intake manifold. I know this is not required for the task but there doesn't seem to be consensus on the interwebs as to whether the job is any easier/takes less time when leaving the manifold on or...
  4. DIY: Do It Yourself
    I have been working for the past 3 days to remove my intake manifold and swap it for an M54B30 manifold. I ALMOST have the manifold out, but it just won't seem to come out. It is very loose, but something is still holding it in. 1) Intake, MAF, ect. have been removed 2) Throttle Body, DISA...
1-4 of 4 Results
Top