E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-4 of 4 Results
  1. E46 General
    Long story Long, after doing the Intake Manifold Gasket and driving 100+ miles yesterday while it was 45(f) car ran fantastic. But it dropped to just below freezing last night for 6 hours. Didn't touch the car until This evening (maybe 39f). I go to start it and all I smell is Gasoline! I popped...
  2. E46 General
    Recently, I purchased a 5 speed 325i knowing full well that I’d have to drop the transmission due to the previous owners mechanic doing some extremely shoddy work. A lot of things are missing and since this is my first ever experience with a BMW, and doing this intense typa work, I knew I was...
  3. E46 General
    Hi everyone, I was working on removing the intake manifold to replace my starter and when attempting to remove the very last host on the bottom of the intake manifold, I broke off the plastic tab/fitting (pictured below). I have a 2004 325i e46. I can't seem to find a part number on this in...
  4. DIY Guides
    I have been working for the past 3 days to remove my intake manifold and swap it for an M54B30 manifold. I ALMOST have the manifold out, but it just won't seem to come out. It is very loose, but something is still holding it in. 1) Intake, MAF, ect. have been removed 2) Throttle Body, DISA...
1-4 of 4 Results
Top