E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-20 of 50 Results
  1. E46 General
    Hi all, It’s been a while since I’ve started up my ’02 330ci – I’m getting the yellow [EML + ASC/DSC + Brake] lights on the dash. I originally mistook this for the ‘Trifecta’ lights error, so followed the guide on reading INPA codes – just realized today the ‘trifecta’ issue is actually...
  2. E46 M3
    2003 m3 manual, disconnected battery to work on headlights and change xenon ballest, put battery back on and now no crank no start. battery was running a little low and not charging good so put a new one on and still nothing, not getting any codes on autophix so just bought inpa cable and...
  3. E46 General
    Hello all, recently I purchased a K+DCAN cable so I can bleed my ABS using INPA, I’ve installed everything correctly multiple times and everything seems to be working until I click on my ABS modules under chassis, or even any other option, I keep getting this error Group file : D ABSKWP...
  4. E46 General
    I’m having an issue with the fuel trims on my car. INPA displays 0 and do not move. The adaptations are -131.07. The lambda sensor screen seams to be frozen. INPA works fine when plugged into a different car. My OBD scanner shows 0 for the fuel trims too. I have tried resetting all adaptations...
  5. Suspension, Brakes
    I have owned a 2002 330i m sport package for 2.5 years and have had the trifecta on since i got it. Brake abs and dsc light. I tried inpa and no codes for it came up. I do not have an abs module under the hood and my cluster has a tamper dot on. According to inpa my wheel speed sensors are just...
  6. E46 General
    Hi, I finally got the INPA software installed but for some reason I can't get it to connect. The two circles "battery" and "ignition" won't turn solid indicating a connection with the computer. I have the switched version and tried every setting, plugged and unplugged, ignition on 2nd setting...
  7. E46 General
    Is my e46 bricked?, I was in ncsexpert to change my doors to lock automatically after 15 mph. Once I saved the trace file and cycled my car on and off It seemed weird when I started driving, the speedometer felt like it was moving slow so I turned my car off. When I went to turn it back on it...
  8. E46 General
    Hello, I recently saw a comment on here for people who have put an m54 gas tank into an m56 SULEV. When this swap is done- the m56 gas gauge in the cluster will never reach the “full” level. The comment mentioned the ability to change the instrument cluster somewhere in the INPA menu to the...
  9. Engine Swaps
    Greetings, thought I'd bring my issues here as you guys seem to know exactly what you're talking about and your advice is imperative for nooblets like me to get anywhere and to expand our knowledge and to get things corrected. I've learned a lot here, and hope to learn more and share more...
  10. Driveline, Performance, Tuning
    Greetings, I have an M54b30 and I've been having an issue with the car behaving sluggish once reaching operating temperature, there's a night and day difference with torque output between driving it within the first 10 minutes of start up (when still running cold) and then once at operating...
  11. E46 General
    Okay so got a renew registration form in the mail and turns out I need to get a smog check done on the car this year. went to go scan it with inpa just to see if anything would come up before I took it to get smogged, lo and behold when i clicked read error memory i got three codes, "234...
  12. E46 General
    So I was just messing around in inpa with my car and I pressed adaptation throttle valve clearing and my car started acting really strange it basically went into limp mode DSC lights were on and it wouldn’t accelerate. I had inpa there so I was able to get the car back to normal but has this...
  13. E46 General
    How’s it going. 2002 E46 325i sedan manual transmission 155k miles Inpa has zero problem connecting to my cars ecu which is MS43. I can read engine DTCs. However, when I try to communicate with any other module such as the instrument cluster, or interior light modules I get an ifh-0009 error...
  14. E46 General
    Hi Guys, Im trying to get INPA properly setup with my K+DCAN cable (from OBD Australia) for my 2003 320i e46 (from OBD Australia). I’ve apparently got everything setup, my cable drivers are installed and my com port for the cable is set to 1/my latency set to 1. When I connect to the engine M54...
  15. E46 General
    hey everyone this is my first post so please if there is anything I'm doing wrong let me know, the problem I have is that I recently downloaded the bimmergeeks standard tools but now that I need the information from the car to update the gearbox I find out that I don't have the functional jobs...
  16. E46 General
    Hello all! I have a 03 330i e46 as a drift misile. A couple weeks ago, I was checking some values on the DME using the PA soft 1.4 and suddenly, the program showed "Hardware not ready", "connection error to IKE" and "connection error to EWS".😅 I did the obvios steps, changing the cable and...
  17. E46 General
    2000 323 Ci, 190000 miles. Hi, Just got INPA running. Can anyone help with what this means? I'm guessing that "1" is the limit of goodness, so since it's showing green I'm good. Cylinder 6 is consistently worse. The others move a round a little and can be 0 at any time. Overall the...
  18. E46 General
    Hello, today i was tracking errors with INPA. To have it all nice and clean, i used F9 to print the codes (expecting it to create a pdf). What happened is that it said it saved the file, then cleared my codes and that's it. I've been searching the pdf file since then. Does anybody know where...
  19. E46 General
    Hey guys so in a pervious post of mine I was trying to fix my parking sensors and I was using inpa in that thread I was sent the link to inpa and the cable to get and it was all working as it should. but I’ve ended up trying to fix my mums x5 and a friends 1 series (both newer models 2006 and...
  20. E46 General
    Hi, plugged in INPA today. My e46 has been sitting for quite some time now. With turned on ignition INPA displays coolant temperature of 38.60 degrees celsius and oil temperature of 39.25 degrees celsius. The temperature in my garage should be somewhere at 10 degrees celsius. What could be...
1-20 of 50 Results
Top