E46 Fanatics Forum banner
hydraulic
1-8 of 8 Results
  1. Driveline, Performance, Tuning
    Hi all, Having some issues with the clutch system on a 2002 bmw 330ci. Started after pulling the trans to chase a leaking rear main and putting a stage 2 clutch in while I had the trans dropped. Put it all back together and the pedal is soft. I thought that was weird because I didn't ever break...
  2. E46 Convertible
    After some troubleshooting, I've determined that Line #34 in my convertible top's hydraulic system has been snipped and damaged by the folding mechanism, causing a leak. Everything else seems to be fine. I need to just replace line 34. Can anyone recommend a source for this? I don't want to buy...
  3. E46 General
    So I am a 19 year old female who doesn't know what she's doing & I wanted to take matters into my own hands when my car told me that my oil level was at its minimum. I had the right oil. I lifted my hood & looked around a little bit, saw "oil only" ignoring the CHF11S because like I said, I...
  4. E46 Convertible
    Hey guys I just bought a 2004 325ci vert with a fully automatic soft top. The thing runs great and everything was just dandy until yesterday. To make a long story short, I tried putting the top up to wash it but something seemed wrong. I took a look but didn't notice anything. Then I tried...
  5. E46 Convertible
    Located in Virginia Beach Navy base. Pulled from a working car. Car only had 60,000 Miles. Feel free to contact me with any questions. Make an offer. 347-792-3221
  6. E46 Convertible
    All - I had the top down today, enjoying the nice whether. When I went to put the top up, the following occured: 1) The top went about 3/4 of the way up through it's sequence ("roof" was almost flat, and the clips were maybe 5 seconds away from getting engaged) 2) I hear a "Pshhhh", and then...
  7. E46 General
    I have bmw E46 3.20d from 2001, 210.000km the car has on counter, Europe Czech Republic, problem with the car is it is steering to the right side. I took it to authorized bmw service and they said it's problem with geometry so i let them fix that. after they finished the results of geometry...
  8. DIY: Do It Yourself
    How do you R&R the Hydraulic A/C tensioner pulley. I got the part (#11281748131) from the dealer and went to replace but couldn't get the old one off. After removing the dust-cap, I wrenched on the nut with a torx bit. When I turn it clock-wise it loosens the tension but should I turn it...
1-8 of 8 Results
Top