E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. E46 General
    I Have a small hole/wear in my block where the air intake connects caused by a screw that was too long. Can this be repaired? Will this cause a vacuum leak? What should I do?
  2. E46 General
    I fitted a new alternator to my 52 plate e46 the weekend, after a day or so since then it's has been running rough so I dug around today looking for split hoses and found something much worse. It seems when I fitted the airbox back on I didn't fit it properly and the belt has been rubbing...
  3. E46 General
    I was changing my oil today and notices a lot of oil and road scum buildup on top of my valve cover. After cleaning off the cover I noticed a small 1mm sized hole in the cover above the timing chain. Is there a way I could fix the hole without replacing the whole valve cover?
  4. E46 General
    Hi, So i know this may seem cheap but I got a set of brand new rims and tires from a friend who had them laying around the past week, they look nice (not the ***** rims) not OEM but same size, bit larger tire 235 instead of the 225 I orignally have on my 323ci, but when i was trying to install...
  5. E46 General
    So my car came equipped without the keyless entry. To get in my car I need to unlock it manually by inserting the key in the key hole and :blah:. So one day i unlock my car and notice that it felt kinda hard turning the key inside the key hole. I ignore it and get in and drive to work. I get to...
  6. DIY: Do It Yourself
    I've searched long and hard and I've not found a "how to" for clearing the drain holes at the front of the convertible cover well. So here goes... Tools required (Image01)... 1. 1/4" ratchet drive 2. 3" extension (1/4") 3. 6" extension (1/4") 4. 10mm socket (1/4") 5. 8mm socket (1/4") 6...
1-6 of 6 Results