E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. E46 General
    Ok first time poster, long time, and extensive reader. I have searched throughly, with no avail in order to find the answer to my question. Basically I pulled my B30 from my 2001 330ci automatic ZF transmission. And rebuilt the motor I pulled a Getrag 250 5 speed manual from a 2004 325i...
  2. E46 General
    Hey everyone, I’m working on rebuilding my engine and I could not get the trans separated when I pulled it. A buddy and I got it to move about an inch back and I know there’s a ton of threads talking about that and what to do but none of them have said anything about the trans completely...
  3. E46 General
    Hi guys, I replaced my input shaft seal today. The old seal sat flush to the top of the hole It is was inserted in, however Ive accidentally driven mine in about a millimetre below the top of the hole. Does this matter? Will it leak if I put the box in the car like this? thanks for any help.
  4. E46 General
    hey guys, I have a getrag 5 speed manual from an e36 that I‘m going to put in my e46 320i my understanding is it’s an exact fit, However it looks like shifter rod joint (the part that links the shift linkage to the gearbox) is different for the e46 compared the e36. Before I buy one for my...
  5. E46 General
    ** So I HAVE already searched through this forum and every other Google article I can find, but still not sure. ** Hey fckers, first post here. I just bought a Getrag 5 speed manual transmission to rebuild and swap into my 2005 330ci (auto) w/ M-Sport performance package. (Whole thing w/...
  6. Driveline, Performance, Tuning
    Hey guys, before you reply to my question I just want to note that I have no history with transmission swaps so if this is like a stupid question I am sorry for wasting your time XD. Anyways, I currently have an e46 323ci with a 5 speed. manual which I believe to be running the Getrag 250g, and...
  7. E46 General
    Hey guys, I am about to pull through with a clutch diy, and I already have my valeo single mass flywheel. Upon fixing my coolant leaks, I decided to look at my transmission bolts to see if I can get them off with the manifold removed and it looks like I can. At least the very top one. Upon...
  8. E46 General
    Hi All, Wondering if anyone has knowledge on interchange issues with Getrag gearboxes between E46 models. My 323i is in the shop with a trans specialist due to jumping out of 1st gear on takeoff. Box has now been pulled & dismantled, and I have been advised is not economic to repair due to...
  9. E46 General
    ive been reading all the story's of fails and success's all day today about the conversion. today finally my junk yard had a m3 and sold me a smg getrag tranny for 800 with 30k on it the thing that doesnt seem consistent is the fact the one guy says ill need to get the spring in the tranny...
1-9 of 9 Results
Top