BMW E46 Fanatics Forum banner

gears

  1. WTB 4.10 ring and pinion

    Engine & Performance
    pm me if you have a 4.10 setup youre trying to get rid of
  2. E46 330 BMW Motorsports ring and pinion

    Miscellaneous BMW and E46 Parts
    E46 rear end gears, bought for Grandam series but never used, they were used when I purchased but very little. 3:73 ration, purchased from diffs online. 200.00 [email protected]
  3. Slight driveline drag with clutch fully depressed

    General E46 Forum
    Hey gang! My 2001 330ci with 215k has developed a nagging issue: I can feel that there is power going through the tranny when I've got the clutch at it's stop. For example, when I am at a light and about to proceed, I push the shifter (against some resistance) into gear and I can feel my diff...
  4. GEAR w/ EXCLAMATION POINT in the center

    General E46 Forum
    What is it? It came on after 3 hour of highway driving. SMG.
  5. Won't go into gear???

    General E46 Forum
    The Car: Manual 2001 330ci So I was driving home tonight, stopped at a stop sign, and all of the sudden the car wouldn't go into gear. I could flop the shifter all around and none of the gears would grab. I called up my dad for some quick advice and he thinks it might be a broken linkage. I'm...
  6. Where to get 4.10s installed in SW Ontario?

    ///M3 Forum
    Purchasing 4.10s :excited:, and am looking for a shop to install them. I've heard good things about both Bimmersport and RMP Motors in Toronto. Has anyone had gearsets installed there (or somewhere else) and/or can comment? Thanks
  7. ***Differential Problems*** Help!

    ///M3 Forum
    Hey i have a 2002 BMW m3 convertible smg. Imola red :-) i recently noticed i had a pretty bad pinion seal leak on my differential. I jacked the car up and replaced the diff fluid with mobile 1 70/90. after about 200 miles i'm still hearing a rubbing noise when i go around turns at low speeds. i...
  8. bmw 330ci 2002 5 speed manual

    General E46 Forum
    just driving down the street and pulled over at a stop light and tried to put it in first gear to get going and it will not go into any gears wat so ever.....reverse is a no and 1 to 5. wen trying to force it, it grinds.......i can presss the clutch to start the car but wen i press the clutch...
  9. E46 GM5L40E Transmission

    General E46 Forum
    I have a 99 328i Auto....Does anyone know if the e39 transmission will work in the e46?? Does all of the GM5L40E trannys bolt up??? Or do i have to get one from an identical 328i?
  10. Can't get E46 ZHP into gear. HELP!

    General E46 Forum
    Hi- Over the last few months, it has become harder and harder to get my E46 into gear. The problem used to be only first gear and if I just released and re-engaged the clutch or I put it in 2nd then moved to first... it would go in fine. Now. the problem affects all gears 1-5. The only one that...
  11. Help with Tranny???!!!

    General E46 Forum
    I have a 99 328i with an auto tranny. It seems to be stuck in first gear when the temp of the car is low. In other words if the needle isnt in the middle of the gauge the gears dont kick in. After the car warms up, the gears kick in and the car is back to normal. Other times the...
  12. Serious Gears Problem

    General E46 Forum
    Ok the other night Friday to be precise was just about to reverse into a spot to park the car when I heard I snap and the gear stick went limp and was wafting about all over the place. Car was stuck in 1st gear at this point, and when moved you could hear a rattle. Finally got it to a garage...
  13. 4.10 gears

    ///M3 Forum
    Can anyone recommend a reputable NY area shop that does work on differentials? I would buy the ring and pinion set along with the installation kit and take it to a good shop to have them rebuild my differential. If anyone in the NY area has changed their gearing please help me out. Thank you...
  14. Feeler: 3.07 BMW Performance Diff in Seattle

    Engine & Performance
    I have a absolutely perfect condition 3.07 differential for sale with 33k miles. I took it off my 2005 ZHP Coupe when I installed my Quaife LSD. This part sells for about $1,200 brand new from BMW if you find it for a good deal. I'm willing to let it go for much less. Input and output flanges...
Top