E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Electronics
    is there a way to replace the OEM needle temp gauge with a little LCD or OLED display to show the coolant temp?
  2. E46 General
    Hey my name is andrey I’m quite new to the e46 world and I wasn’t able to find anyone with a similar issue as me. Basically when I used my turn signal it would flash on the gauge cluster as normal and once I complete the turn the outside lights stop flashing but the gauge cluster stays flashing...
  3. E46 General
    Hello, I recently saw a comment on here for people who have put an m54 gas tank into an m56 SULEV. When this swap is done- the m56 gas gauge in the cluster will never reach the “full” level. The comment mentioned the ability to change the instrument cluster somewhere in the INPA menu to the...
  4. E46 General
    Hey guys hoping someone has an answer to my problem here. My gauge cluster has seemingly started to malfunction. The odometer has stopped working as well as the light fixtures for my coolant temp and tach. The tachometer however stays illuminated even after turning my car off, toggling the light...
  5. E46 General
    Hi everybody! I'm new to the forum as a poster but I've found all kinds of great help here in the past. I'm hoping the community can come through for me again. My car is a 2000 328Ci, which originally started life as an automatic. I did a manual swap to the ZF 5-speed back in December. While I...
  6. DIY: Do It Yourself
    Hey, I had an issue with the gas gauge and the led display in my '01 325xi wagon. I picked up a used cluster form a junk yard only to find that it triggered the manipulation dot and set off the DSC/ABS system. I knew I could fix the DSC light with NCS Expert but I wanted to adjust the...
1-6 of 6 Results
Top