E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-6 of 6 Results
  1. Motorsports, Track
    Hey guys so im trying to figure out whether i should run a inline hydro or adjusted ebrake with extended handle for my drift car. I know these options are not the best but I cant run a dual caliper setup as I need my odometer. Ive seen a few people run the stock ebrake but im not sure if it...
  2. E46 General
    Anyone think there's any possible way the wood handbrake trim from the E60 could be retrofitted to our cars? Swapping my car over to smoke poplar, but it looks like handbrake trim was never made in this color for us :confused: P/N for the E60 part is 34400302393.
  3. E46 XI
    What's up guys, just a quick question regarding my ebrake. It's been a few weeks where my ebrake pretty much has no effect. Been extremely busy since and kind of put it to the side as it was never really that much of an issue. Long story short I heard a pop noise from it recently as if it...
  4. E46 General
    i changed out all the bushings today in the rear of my car today and i ran into this one issue the ebrake cable slipped out of the rear drum.......do i just push the end back into the hole and it clicks into place? how do i get it to fit back in!
  5. Suspension, Brakes
    Just did a full brake swap.. (rotors and pads) but now the E-brake is completely dead. And the button on the top of the handle is pressed at all times... Any ideas?
  6. E46 General
    I need to dismantle and remove my emergency brake handle and stick temporarily, is this fairly easy to do without upseting the cable tensions underneth? Thanks in advance.
1-6 of 6 Results
Top