E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Electronics
    Unfortunately these DME issues don't have as much coverage as other issues on the forum. I have pretty much exactly the same scenario as this thread here, but the OP never posted a final update: Single Cylinder Misfire I opened up the DME and saw a cracked transistor. At this point I understand...
  2. Driveline, Performance, Tuning
    I recently decided to try to reflash the DME (MS43) on my 325i. Everything had gone smoothly up until it was time to write the new 512kb file in JMGarageFlasher. Instead of opening the one from MS4X, I accidentally hit write again. I figured it was just rewriting the copy of the original, and I...
  3. Driveline, Performance, Tuning
    Hi All, So I tried to update my DME and EGS using WinKFP and I wasn't too successful... I ran into an error 211 and tried all sorts of things to remedy - to no avail. My car will no longer run. The Error Reads "Data Transmission to interface disturbed: 10GD8604 Here's a screenshot of the...
  4. E46 General
    Hello everyone, I recently swapped engines from 325ci to 330ci (m54b25 to m54b30) and need help reflashing my DME I have WinKFP downloaded on my computer but it doesn't seem to recognize my car. No ECU options come up when i try to select one. The screen is just blank. Is there something else i...
  5. Driveline, Performance, Tuning
    Was using jmgarageflasher to read my dme and it kept freezing at random percentages, and giving "wrong echo bytes" when trying to connect, eventually got it to connect, then was getting "wrong echo answer" as i said at random percentages, between tries id wait a few minutes to see if the...
1-5 of 5 Results
Top