E46 Fanatics Forum banner
cylinder
1-14 of 14 Results
  1. E46 General
    Hello everyone I seem to have a misfire with fuel cutoff on cylinder 2. Code P1345 or BMW code 239. I have tried multiple things to attempt fixing this but I just need help. I just got the car not too long ago and I love it I just want to fix the problem. What I have tried Swapped coils around...
  2. E46 General
    I was driving for a while the other night and everything was good. I stopped in a parking lot and went to move and I could barely get my car into 1st gear. The entire car moves forward when pushing on the shift knob. Its bad almost through every gear but the odd shift goes smoothly. I have no...
  3. E46 General
    I have a 2000 323I auto that I recently purchased. When I got it the key fob was broken but the key itself still worked (turned car on, worked locks, ect.). I bought a new key fob from the dealership and they weren't able to initialize it. They tried many different ways.. yada yada.. finally the...
  4. E46 General
    I needed to remove the cylinder head and was having trouble removing the exhaust manifold the way the Bentley manual described, so I was able to remove the head with the exhaust manifold still bolted on. You need to be pretty strong to lift the whole thing out at the awkward position you're...
  5. E46 General
    I have a 2000 323i that has been rough idling and has is much slower than usual. Service engine light is on, got back codes P0303 and P0302. Switched ignition coils between cylinders 1 and 2 to make sure it wasn't a coil. Code still read cylinder misfires in 2 and 3. Changed all spark plugs...
  6. E46 General
    Hey guys, just wanted a third plus opinion on something regarding my 2000 328i... Pre-story: Overheated a few times on a drive to LA through the grapevine (30min wait between going again, I know I ****ed up here). Months before this, noticed coolant was continually low, so kept topping up...
  7. E46 General
    Hey everyone! So my 2003 325xi with 85,000km (53,000 mi) has developed an intermittent misfire, which seems to have coincided with the recent cold snaps we've been having in Canada. 1. Seems to only occur when I start the car in the morning after it's been sitting overnight and there's been a...
  8. E46 General
    My car doesnt have a door lock cylinder dont ask. But I managed to get one from another e46. I want my master key to work with that one. Does anyone know what a locksmith will charge for making the cylinder work with my key and do I need proof of vehicle? Because im still waiting on title
  9. E46 General
    Hello! I am a fresh bmw owner and have already got trouble with the car. I've searched around a bit, but have not found any clear answers to the problem, so I decided to ask on a forum hoping to find out what it could be! Bought the car for approx. a week ago and it is a 2003 320ci 2.2 liter...
  10. E46 General
    Hi guys, Uk owner hear - hoping I could get some advice from your vast collective experience... Ok - so about two a half years ago I bought my beamer... cost me £2500 with the 18" alloys. Since then I've spent around £2095 keeping it alive. Im ok with this - 240 for tyres, 600 for pads, discs...
  11. E46 General
    Hey, I was hoping someone could help me diagnose a possible engine problem with my '03 330i that has about 170k. About 10k ago my engine light started going on and off intermittently but I had no problems so I just ignored it. Then, the other day I started my car, and the whole car was...
  12. E46 General
    Hey, I replaced the vanos seals but when tightening the vanos cylinder cover bolts I broke 2 of them. :banghead: I guess I have a faulty torque wrench. I need to know the parts number for the bolts. Please help!
  13. E46 General
    firstly I am based in Malawi (Africa) and we are not fortunate enough to have access to highly experienced mechnics, that said my current mechanic is an ex BMW technician who is a decent mechanic. Few weeks ago car was leaking some oil from one of the pipes leading into CCV and the car went...
  14. DIY: Do It Yourself
    Number 18 here in this diagram, I removed from the transmission to aid in bleeding due to limted access to the bleed screw. All was well untill.. The bleed screw was tight and the clutch was depressed while #18 was out of the clutch still. The items INSIDE of 18 came flying out.:ben::ben...
1-14 of 14 Results
Top