Search Results for ‘control’

Hi guys!! I solve one mysterious disorder for a friend [e46 320d / M47TU / made 09-2003] Problem description: The engine cannot be started, but after the DDE unit has cooled in the freezer - the engine can be started after a few minutes of DDE cooling in the freezer and reconnection. When...

This is going to be a quick review of Condor Speed Shop's UHMW offset front control arm bushing. Thought I'd do a write up since I haven't found one yet. Unfortunately I don't have many pictures of what I did so you'll just have to bear with me. The bushing consists of a UHMW polyethylene...

Hey, So I need a new xenon control module in my 2000 e46 328ci - just wondering if I can use a control module from any year of e46. Realoem is saying the part # from my control module on my vehicle (61358376273) is found on all years of the e46. But a quick look on ebay is saying otherwise...

My E46 325i Sport Manual now has 170K miles and ever since I've owned it (from 130K) it has had problems in the low range: 1) When the car is cold it pulls away smoothly - no problems. 2) When the car is warm, it idles smoothly with the foot off the gas at 800RPM. If I let the clutch out...

Hey guys, I have searched forever in these threads for my specific problem, but I can't seem to find any answers to my specific case. Hopefully you guys can help me out! So 1) My brake lights won't work. I have the actual bulbs checked at autozone, and they run fine when plugged into another...

*I DID try to search for this issue on a lot of forums but could not find one with this issue so I decided to post my own* I drive a 2003 325i e46 with a 5 speed manual. Okay so I am going to explain the scenario in which I first encountered the issue; I was driving down the interstate at about...

Happy christmas to everyone!! I just installed a relocation kit, or actually an OEM part for the climate control to be placed at the bottom. Now i bought it from a bmw part store, and they dont have any other black/dark colored frames than the one i got, but still... What i have before is even...

So i have a little bit of a problem with my BCM so my car wont start can i use an used 3 series BCM or i just have to buy a new one for my car this is the part number 61353454607

My traction control won't come back on. I hit the button and nothing happens. The light stays on and I wanna know how to turn it back on. Please help.

Hey guys I was just wondering where the best place to buy some control arms and bushings for a good deal was. eBay? And is there any decen diys our there to help? Thanks guys. Greatly appreciate and sorry if this is a repost.

Who has the cheapest price on front control arms? Anyone have some decent packages? And while I'm at it: Who carries decently priced "tune up" packages? Thank you all in advance. :thumbsup:

Hello All, Starting this thread for help because I searched by this topic, but didn't find anything that seems to match my circumstances exactly. 2001 325Xi Steptronic trans (GM I think) 160k on the car. It has the warning light on the dash that corresponds in the owner's manual to Electronic...

Fan control module. Located on the fan shroud. #'s on it are: 6904768 HW20 SW49 990705 11373280 64 944 FCM 12V 390 11373280 64 990705 wtf how do I buy one of these.

First the obligatory disclaimer: I take no responsibility for anyone trying out anything in this post. If you do something like this, do it in an empty parking lot away from people, cars and houses, and anything else! :read: Today was my area's first real snow of the season. I was coming...

Hi, Basically i think my ide control valve is to be playing up (what i get after looking at other threads). Every now and again on a cold start-up, i have to top up the revs to stop the car from dying, but after that it is totally fine, even if i stop the car at the end of the road, it will...