E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 45 Results
  1. E46 General
    Hi all, hoping someone with more intelligence can shine some light on this for me!! Started enabling track mode (LED present) and wrote $7MA to AKMB. Then it got weird. I have no MK60 as an ECU (I have DSC but it doesn't respond / errors out). Updated SP DATEN to v69 and ran update procedure...
  2. E46 General
    New to coding, watch a few youtube videos how to code only. Prior to coding, I have DRLs which is dimmed high beams and single flash on hazards. I wanted to change or code double flash hazards using NCS expert. I went to the process of coding and after I changed the parameter for double flash...
  3. Electronics
    Hey Fanatics, This is a follow-up to last post OE Nav Retrofit with an X3 Siemens CID unit vs. Becker BM53? Summarizing, I recently installed BMW's Mk4 widescreen navigation system including: Retrofit wiring harness (BMBT) Widescreen Boardmonitor (RAD) CD-82 Radio from E83 X3 (NAV) Mk4 DVD...
  4. E46 General
    Basically, I'm trying to code some options into my gm5 module with NCS Expert/Dummy, and after I write the code to the module, everything looks correct, until I try to test out the feature. I know that I'm coding to the correct module and taking the correct steps, but I can't seem to make...
  5. E46 General
    This is seriously annoying. I'm trying to code my '01 sedan to have comfort opening/closing with the key fob, and acoustic and visual indicators when locking the car (beep and lights flash) When I use NCS Expert/Dummy, I change the values that I want to aktiv, and then run sg_codieren and get...
  6. E46 General
    Instead of them being off my default, I would like to recode them to be on my default. Does anyone know if this is possible? I know how to use NCS Expert to code, but I'm unsure what needs to be coded.
  7. E46 General
    Hello everyone, I have recently come across the issue of my car not being able to connect to an ODB2 scanner. Oddly enough, there is no issue connecting an INPA K+DCAN cable to code the car, as I have successfully done a couple months prior. Some background info on the car and the swap: I...
  8. Electronics
    Hello! I just upgraded my E46 (02/2000) from halogen to OE used xenon headlights. When I wanted to code my LCM for xenons with NCS, the option for xenon headlights does not exist when looking through options with NCS Dummy. Headlights work normally (i expected flickering with car turned on)...
  9. DIY: Do It Yourself
    My tailgate has never worked since I bought this car, the button on the handle is not pressable, and it is like pressing on a hard surface. The glass window would not open either with the button, but it can be opened with the keyfob, so I thought that it would be worth a shot to recode the GM5...
  10. E46 General
    My car is from 08/2001 but at one point ULF was retrofitted using SSS/Progman, an option only available on vehicles after 09/2001. Right now when entering NCSexpert I can read the VO from ZCS modules (KMB LSZ) and from FA modules (AKMB ALSZ). How could I delete the information from the FA...
  11. E46 General
    Hey everybody who decided to prefacelift swap their E46 originally with a facelift front end! I recently swapped my 2004 that had adaptive, automatic headlights to the bi-xenon from an m3 with the prefacelift front end as well. I looked all over forums and couldnt find an answer to my solution...
  12. E46 General
    Hey everyone, I’m gonna be swapping from the old single stage square style airbag to the dual stage round seen here I’ve read it needs to be coded for the airbag to work, can anyone point me in the right direction to diy it?
  13. E46 General
    Anyone in the Los Angeles area. I’m doing auto to 5 speed swap on my e46 and I’m getting stuck on the pedals/wiring/coding. If anyone out there is local in SoCal and is willing to help. hit me up!! $$
  14. E46 General
    Hello, I've recently downloaded NCS Expert and tried coding out all of the front light checks cold and warm, to remove the warning from my dash (no bulbs are actually out, I believe the low and high beams have been changed to LEDs) however the lights still remain on my dash? Any advice or help...
  15. E46 General
    Hello, I am trying to connect my ncs expert to my e46 323ci 00. When I try to read the vin with revtor's ncs expert profile I get a long list of errors what could be the issue for me? Do note that inpa is working perfectly and there are only problems with ncs. I get the same errors from all the...
  16. E46 General
    Hello everyone, I am trying to code force brake stage 2 and stage 3 when ABS kicks in. I have a 2002 BMW 330ci with LED tail lights that I properly refrofitted with a lcm on 3.6. I used the OEM harness adapters and added +LEDH in my VO when I coded them. I did this last year. However now I...
  17. E46 General
    Hello, i have an BMW E46 323CI with an defect GM5 module. I was able to get a new module with the same number as the one i had. The problem is that it was from a sedan, and i got a coupe. The central locking is now working, and i can open the trunk without using the key and wipers and washers...
  18. E46 General
    Two years ago my brother-in-law and I swapped the trans in our E46 330i from an auto to a 5 speed that we took out of a junked 330i. He did 95% of the actual work while I played around with an OBD2 cable and a suite of BMW software I got from Romanian eBay. The car works perfectly (outside of...
  19. E46 General
    Hi there ! I have a 2004 BMW 330CI with a lot of options BUT power folding mirros, which to me seems pretty important (I often have to park in tight spaces). I've been checking power folding mirror prices on ebay for a few days now and they are pretty expensive. So I asked myself : is it...
1-19 of 45 Results
Top