E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 33 Results
  1. E46 General
    Hi Guys, CAR: 325i 2001 automatic I got the SES light and when i checked the codes 3 came up: P1448-Diagnostic Module Tank Leakage(DM-TL) pump current too low during switching solenoid test P0491- AIR system insufficient Flow Bank 1 P0492- AIR system Insufficent Flow Bank 2 Ive also notice...
  2. E46 General
    Hi, so I currently have the code P0369: "Camshaft position sensor B, Circuit Intermittent Bank 1" For me, this makes the idle rough and it makes pulling away in first much more difficult. The code doesnt leave an engine light on. When i first saw the code, i removed it and it felt like it was...
  3. E46 General
    Other day the engine started to stall all of a sudden and threw out a code (P0344) Obviously I google this and check it out, no damage to any of the wires that I can see. So I replaced the Camshaft Position Sensor. Car runs for a few minutes, I give it little throttle and it dies again throwing...
  4. E46 General
    Installed all new sensors and brand new wiring harness in the transmission after it threw a few different codes. (P1732 Gear Monitoring 4 @ Electrical Sub Program, & P0721 Output Speed Sensor) Fast forward to last night. I put new fluid in the transmission, but still had the P1732 code...
  5. Europe
    My e46 by VIN was an auto model, I have a kickdown pedal and EGS error codes, but no CEL. Do I really need to flash from current 7795649( Part number 7793443) to a manual firmware RealOEM shows 2 manual options for my 2004/07 car - 13617801004 13617801006 I am afraid to brick my ECU...
  6. E46 General
    I had accidentally left open a window in my car and it rain, it causes moisture inside the car and after 3 days, I turn my car on and my gauges are stuck and the instrument cluster says codE and it gave a service engine light i don’t what exactly it, but I guess it the ecu or a part of it and...
  7. E46 General
    Hi, at the outset I apologize for my English but these forums are probably my last way out. I have a problem, I added folding mirrors with memory (11pin) and seats with memory, I added the FA to the car and I have an SM module normally but unfortunately BTM and FTM still have not appeared. I...
  8. E46 General
    Hello! So i decided to read my car for codes and i got a few of them. Almost all of them are fixed except for one single code. The code says the following: "CAN: data storage difference to LZV". The thing is that i haven't found anyone that has the fix for the code and that's why im asking it...
  9. E46 General
    Just got my fault codes read at O-Reilly's for free (Dealership tried to charge me $210 for a scan when I got my airbag recall done today). Got a P0304 which I know is a misfire, but also got codes without a P: 10196, 10461, 10055, 10386. I can't seem to find these anywhere to do more research...
  10. E46 General
    Hello I have a 2004 BMW 325i with less than 130k miles and am running into issues. A few weeks ago my battery drained (unexpectedly) and I had to jump start the car. A few days later, I see a peculiar issue with the car. The word "Code" appears on the instrument panel. The fuel gauge, RPM...
  11. E46 General
    Hello So a while back I did some work on a fuel pump and needed to reset the codes. By accident (not knowing) I reset the codes while the car was on or had was in the ignition position. Afterwards I read I shouldn't have done that. Immediately after I noticed a whirring noise from the fan like...
  12. E46 General
    How would I install dynamic brake force display on my BMW. It's a 2005 325ci with the led tail lights.
  13. E46 General
    Hi fellas I recently got a shadow code on my 2000 3.28ci . The code is called "activation valve suction-jet pump" . I can't clear the code with the scanner nor by disconnecting the battery. Whatever I tried to clear the code the check engine light never disappeared for a sec. I also cleaned up...
  14. E46 General
    My car starting shaky last week and I drove it 30 miles to work. The service engine soon light was on the entire time as well, including very little power. Turned off the car and turned back on, it ran great. Went to AutoZone and the code reader threw up a P1351, Misfire cylinder 5 with fuel...
  15. E46 General
    What's up guys, this is my first post and also the first BMW I have owned. I have a 2001 325i and it's been nothing but a nightmare. I have the code P0339 (crankshaft position sensor) I went ahead and replaced it with a autozone but it did nothing. So I returned it and ordered a OEM replacement...
  16. E46 General
    Just bought a little silver 2005 325ci with a black canvas top. 135,000 miles Service records looked good. Not two weeks later my SES light comes on. AutoZone says p0171 p0174 Local mechanic says he knows the problem and it costs $800 (Pvs or PVC something) Bimmer doesn't overheat...
  17. E46 General
    Hello again, Around Christmas, my engine light came on. I noticed nothing wrong with the car at all. A few days later, it went off. Apart from the little idle shivering and the headlights/interior light dimming/surging slightly when car has been running for a while, the car has been fine since...
  18. E46 General
    Recently I upgraded my whole sound system and added two amps (one powering the stock speakers and one powering a subwoofer). Upon wiring everything, I went out and bought a new battery, after installing the battery, along with the two amps, everything went good until I went to start my car...
1-18 of 33 Results
Top